Download MOLAND-LIGHT
Transcript
Type of information Type of model Application Spatial resolution Temporal resolution Description Constrained cellular automata, simulation. All cells. Depending on the application case (from 50 to 1000 meter) Year. Process description In MOLAND-LIGHT applications, the whole modelling area is represented as a mosaic of grid cells, each occupied with a specific land use. All cells together constitute the land use pattern of the study area. In principle, it is the relative attractiveness of a cell as viewed by a particular spatial agent, as well as the local constraints and opportunities that cause cells to change from one type of land use to another. Changes in land use at the local level are driven by four important factors (see Figure below): • • • • Physical suitability, represented by one map per land use vacant and land use function modelled. The term suitability is used here to describe the degree to which a cell is fit to support a particular land use function and the associated economic or residential activity for a particular activity. Suitability maps are constructed based on physical characteristics of the location. Suitability maps remain constant during the simulation for land use vacants and land use functions unless new suitability maps for specific times are imported. The static suitability maps are described in the Suitability the section of this chapter. Zoning or institutional suitability, represented by one map per land use function modelled. Zoning maps are used for enforcing spatial restrictions on the allocation of land uses. For each land use there is a time-series of zoning maps, specifying which cells can and cannot be taken in by the particular land use allowing changing zoning regulations over periods of time. The model allows for 3 time-periods, which can be changed by the user. Zoning maps remain constant during the simulation unless the user changes them. Accessibility, represented by one map per land use function modelled. Accessibility is an expression of the ease with which an activity can fulfil its needs for transportation and other infrastructure in a particular cell based on the infrastructure network. The accessibility is calculated per land use function and only changes if the user changes the zonal accessibility parameters in the transport model or the infrastructure network or the accessibility coefficients (the importance of different land use functions to be close to different elements of the network) in the land use model. Dynamic interaction of land uses in the area immediately surrounding a location is represented by the Neighbourhood potential. For each land use function, a set of spatial interaction rules determines the degree to which it is attracted to, or repelled by, the other functions present in its surroundings; a 196 cell neighbourhood. If the attractiveness is high enough, the function will try to occupy the location, if not, it will look for more attractive places. New activities and land uses invading a neighbourhood over time will thus change its attractiveness for activities already present and others searching for space. This process constitutes the highly non-linear character of this model. On the basis of these four elements, the model calculates for every simulation step the transition potential for each cell and function. In the course of time and until regional demands (provided by the user or calculated in the regional model) are satisfied, cells will change to the land use function for which they have the highest transition potential. Consequently, the transition potentials reflect the pressures exerted on the land and thus 44