Download 1747-SDN DeviceNet Scanner Module Installation Instructions

Transcript
1747-SDN DeviceNet Scanner Module
33
• If a slave device is not communicating at the time the scanner module
processes its Request Transaction Block, the scanner module will return an
error status for that transaction.
• Check documentation of destination device for specifics concerning services
supported and Class Instance Attribute information. At a minimum, the
scanner module supports the following DeviceNet services in Request
Transaction Blocks:
Service Name:
Service Code:
Example:
Get_Attribute_Single
0E hex
Upload a single parameter value from a
device
Set_Attribute_Single
10 hex
Download a single parameter value to a
device
Get_Attribute_All
01 hex
Upload all parameter values from a device
Set_Attribute_All
02 hex
Download all parameter values to a device
• All transaction blocks are processed, therefore, an unused transaction block
must be left blank.
• Client/Server commands and requests with transaction IDs that are in use are
ignored by the scanner module.
• If a slave device returns a DeviceNet error in response to the request
downloaded from the processor, the scanner recognizes the error as a
successful transaction (status code =1).
Publication 1747-IN058C-EN-P - May 2002