Download Dynamic Perception MX3 Motion Controller

3.2 Control Screens
There are five main control screens: 1. Program Control 2. Camera Control 3. Motor 1 Control 4. Motor 2 Control 5. Motor 3 Control You may switch screens by pressing the [Up] and [Down] buttons, as long as the cursor is not active on the screen. To select a control on a screen, first press [Right] to access the first available control on that screen. Afterwards, pressing [Right] or [Left] switches between available controls. Once a control is selected, use [Up] and [Down] to change the value of that control. To stop selecting a control press [Left] or [Right] until no control is highlighted. More details on the available controls are available in the Main Control Screens section below. 3.4 Accessing Menus
To access the Main System Menu, press [Enter] on any control screen when no control is selected. Some controls have specialized menus available to them. To access these menus, press [Enter] while the control is selected. If the control does not have a specialized menu, the [Enter] button will bring up the main system menu. Controls which have specialized menus are documented in the Main Control Screens section below. Page 10 of 50 Copyright © 2014 Dynamic Perception LLC dynamicperception.com All Contents licensed under the Creative Commons Attribution Share­Alike 3.0 License