Download ESIE05-04_low resolution

1–34
3. When closing the discharge grill (2 or 3 way discharge), direction of
pipe connecion will be limited, please refer to Installation manual.)
discharge grill, the
required space is 30mm
or more. (Note 3)
*
or more
or more
*When closing the
Height of suspension bracket
*
or more
Suspension bolt
*
or more
or more
(Required space)
4
2.In case of using wireless remote controller, this is the position for the
signal receiver. Refer to the drawing of wireless remote controller
for detail.
NOTES:
1. Location of unit’s name plate: on bell mouth.
Brand name plate ( Note 2)
be raised up to 350mm from the top surface of the product.
3
Required space
*
Outlook and
dimensions
*Drain pipe can
Drain
connection
location for rear
piping
1.17
Suspension position
11
Drain
connection
location for
upwards piping
General Outline
ESIE05-04
FUQ100, 125B
The illustration below shows the outlook and the dimensions of the unit (mm).
5
Part 1 – System Outline