1
Download Note - MATsolutions
Transcript
R&S FSU IEC/IEEE-Bus Commands of HP Models IEC/IEEE-Bus Commands of HP Models 856xE, 8566A/ B, 8568A/B and 8594E Introduction The R&S FSP analyzer family supports a subset of the IEC/IEEE-bus commands of HP models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A, 8566B, 8568A, 8568B and 8594E. Despite the differences in system architecture and device features, the supported commands have been implemented in a way to ensure a sufficiently high degree of correspondence with the original. This includes the support of syntax rules for not only newer device families (B and E models) but for the previous A family as well. In many cases the selection of commands supported by the R&S FSU is sufficient to run an existing IEC/ IEEE bus program without adaptation. The device model to be emulated is selected manually by means of the key sequence SETUP GENERAL SETUP - GPIB - GPIB LANGUAGE via the IEC/IEEE bus using the SYSTem:LANGuage command. To make it possible to also emulate device models that are not part of the selection list of the GPIB LANGUAGE softkey, the identification string received in response to the ID command can be modified (key sequence SETUP - GENERAL SETUP - GPIB - ID STRING USER). This allows any device model to be emulated whose command set is compatible with one of the supported device models. 1166.1725.12 6.253 E-2
