1
Download Manual Change - Agilent Technologies
Transcript
COMParator Subsystem :BIN:COUNt[:STATe] The :BIN:COUNt[:STATe] command sets the BIN count function to ON or OFF. The :BIN:COUNt[:STATe]? query responds with the current ON/OFF condition of the BIN count function. Command Syntax 2 COMParator:BIN:COUNt :STATe 3 8 ON > > < OFF > >1 > > : ; 0 Where, 0 (decimal 48) When the function is OFF 1 (decimal 49) When the function is ON Example OUTPUT 717;"COMP:BIN:COUN ON" Query Syntax COMParator:BIN:COUNt :STATe ? Query Response 2 3 Returned Format is : <NR1><NL^END> Example 8-74 Command Reference 10 20 30 40 9 > > = OUTPUT 717;"COMP:BIN:COUN?" ENTER 717;A PRINT A END
