1
Download Manual Change - Agilent Technologies
Transcript
OUTPut Subsystem The OUTPut subsystem command sets the DC bias monitor function. Figure 8-4 shows the command tree of the OUTPut subsystem group. OUTPut Subsystem Figure 8-4. OUTPut Subsystem Command Tree The :High POWer command sets the high power mode to ON or OFF, which means that Option 001(Power Amplier/DC Bias) is valid or invalid when Option 001 is installed. The :High POWer? query returns the current high power mode setting. Refer to Appendix G. :High POWer Command Syntax OUTPut:HPOWer 8 9 ON > > > > < = OFF > 1 > : 0 > > ; Where, 1 (decimal 49) When the function is ON 0 (decimal 48) When the function is OFF Example OUTPUT 717;"OUTP:HPOW ON" OUTPUT 717;"OUTP:HPOW 0" Query Syntax OUTPut:HPOWer? Query Response Returned format is : <NR1><NL^END> Example 10 20 30 40 OUTPUT 717;"OUTP:HPOW?" ENTER 717:A PRINT A END Command Reference 8-17
