Download RAID_Firmware_Users_..

Transcript
There are three categories of events as shown in TABLE E-1:.
TABLE E-1
Categories of Event Messages
Category
Description
Alert
Errors that need to be attended to immediately; might require
reconnecting cables, replacing a component, or rebuilding a drive.
Warning
Notification
Errors that might indicate a temporary condition, a possible component
problem, or the need to adjust controller parameters. Press Escape to clear
message.
Informational message sent from controller firmware; press Escape to
clear message.
Controller Events
The controller records all array events during power on; it records up to one
thousand events.
Note – Powering off or resetting the controller automatically deletes all recorded
event log entries.
Controller event messages include the following:
Controller Alerts
Controller ALERT: Redundant Controller Failure Detected
A controller in a dual-redundant configuration has failed.
Controller SDRAM ECC Multi-bits Error Detected
SDRAM ECC multi-bit error.
Controller SDRAM ECC Single-bit Error Detected
346
Sun StorEdge 3000 Family RAID Firmware 4.15 User’s Guide • May 2006