Download Model CJ 18DSL

7. Removal of the roller holder
(1) Remove the two Retaining Rings (E-Type) for D3 Shaft [44] from the Pin [41].
(2) Pull out the Needle Roller [39] press-fitted in the Gear Holder [34] and remove the Roller Holder [40].
(3) Remove the Needle Roller [39] from the Gear Holder [34].
• Removal of the roller holder
Needle Roller [39]
Gear Holder [34]
Roller Holder [40]
Pin [41]
Retaining Ring (E-Type) for D3 Shaft [44]
8. Removal of the change knob
(1) Remove the Retaining Ring (E-Type) for D5 Shaft [35] and remove the Change Knob [45], Spring (C)
[46] and Steel Ball D3.97 [47].
(2) Be careful not to lose Spring (C) [46] and the Steel Ball D3.97 [47].
• Removal of the change knob
Retaining Ring (E-Type)
for D5 Shaft [35]
Steel Ball D3.97 [47]
Spring (C) [46]
Change Knob [45]
-15-