Download - Permobil

Support wheel bracket
Support wheel bracket
Removal
1. Switch off the main power switch on the control panel.
2. Remove the rear wheel on the side in question. See the illustration above.
3. Remove the two screws (2) that hold the support wheel bracket in place at the rear (see
illustration). At the same time, lift the support
wheel carefully to make it easier to remove the
screws. Please note that the spring in the top
edge of the bracket now comes loose.
4. Remove the screw (1) that holds the support
wheel bracket in place at the front (see illustration).
1
Assembly
Assemble in the reverse order. Begin with the
front screw (1) and associated spacer and washer. Then replace the spring before fitting the two
remaining screws (2) with associated spacers and
washers. Lift the support wheel carefully to make
it easier to fit the two rear screws.
2
Attaching the support wheel
14