Download RVV NG Vender with 5-button Programming

Transcript
SECTION 5: Troubleshooting
FIGURE 5.27.
Y-axis pulleys
Check the top pulleys and the pulley on the Y-motor to make
sure they are not loose or slipping. Also, check the screws
which secure the top idler assemblies to make sure they are
not loose.
Y-motor pulley
Top left idler screw and pulley
Top right idler screw and pulley
2. X-axis (left and right movement)
a. Check the X-belt for proper tension. When the X-belt has proper tension, it should be firm but not tight.
b. Check the X-motor pulley for slippage. (Refer to Figure 5.28.) If the pulley on the motor is loose, replace
the motor. Also, check the X-belt idler pulley for slippage. No belt slippage on the pulleys should be heard
while the X-belt is running.
c. If tension is correct and neither pulley is found to be loose, replace the X-belt.
FIGURE 5.28.
X-axis motor pulley
Check the pulley on the X-motor to make sure it is
not loose or slipping, and check the X-axis belt for
proper tension. No slippage should be heard when
the X-belt is properly adjusted.
Royal Vision Vender NG 5-button Service and Parts Manual
61