1
Download Sun Datacenter InfiniBand Switch 648 Administration Guide
Transcript
InfiniBand Software Command Overview The OFED software package contains the OpenIB software suite. The suite is comprised of many InfiniBand software commands that are a means of monitoring and controlling aspects of the InfiniBand fabric. These commands are installed on and run from the Linux InfiniBand host, which is also the host of the Subnet Manager. Use of these commands requires thorough knowledge of InfiniBand architecture and technology. Related Information ■ Switch Reference, understanding InfiniBand software commands ■ “CLIA Command Overview” on page 8 ■ “Switch-Specific Command Overview” on page 9 ■ “ILOM Command Overview” on page 9 Monitoring the Switch The following topics enable you to display and check the operation and status of the switch components. Note – Commands described in these topics are issued on the CMC as the root user. ■ “Performing General Tasks” on page 11 ■ “Checking Power Supplies” on page 13 ■ “Checking CMCs” on page 15 ■ “Checking Fabric Cards” on page 18 ■ “Checking Line Cards” on page 30 ■ “Checking Other Switch Characteristics” on page 40 Related Information 10 ■ “Understanding Administrative Commands” on page 1 ■ “Monitoring the InfiniBand Fabric” on page 43 ■ “Controlling the Switch” on page 57 ■ “Controlling the InfiniBand Fabric” on page 91 Sun Datacenter InfiniBand Switch 648 Administration Guide • May 2010
