Download Service Guide - Agilent Technologies
Transcript
Troubleshooting Troubleshooting Using External Test Figure 4-47 Dynamic Range tests dialog box example (E5071B Opt. 413/414) b. Select the S parameters for the test by clicking the check boxes. Then, click “Start Test“ button. The instruction dialog box opens as shown in Figure 4-48. Follow the instruction. NOTE Figure 4-48 Clicking “Select All” button checks all the check boxes. Clicking "Select None" button clears all the check boxes. Click "Exit" to return to the External Test dialog box SHORT (all ports) dialog box c. Connect type-N Short terminations to all the test ports. NOTE For more information on the Dynamic Range tests setup, see Table 4-8. Table 4-8 Dynamic Range tests setup Test parameter Connect Short terminations to Sweep freq span, IFBW, Nop and RF power settings (Automatic) S12 S13 (Opt. 313/314/413/414) S14 (Opt. 413/414) S21 S23 (Opt. 313/314/413/414) S31 (Opt. 313/314/413/414) S32 (Opt. 313/314/413/414) S34 (Opt. 413/414) S41 (Opt. 413/414) S43 (Opt. 413/414) All the test ports 3 MHz to 3 GHz (E5070B), 248 3 MHz to 8.5 GHz (E5071B), 3 kHz BW, 101, max. source power Chapter 4
Related documents
Service Manual
Agilent 4396B RF Network/ Spectrum/Impedance Analyzer
PCB and Cu Surface Order Sheet
User`s and Service Guide
Compact Reach Xtend
Z5623A Option H83 User`s and Service Guide
Equipment Management Technology 1525 Pama Lane Las Vegas
N5392A Ethernet FAQs
User Manual - Compuprint
User Manual - Compuprint
Agilent Antenna Test Seminar
Agilent Technologies Option H48 Multiport Test Set Z5623A Specifications