Download LIBRARY B FUNCTION BLOCKS INSTRUCTION MANUAL

Function Block Instruction Manual – Library B
Idx
Parameter
31
OUT4
DataType
Valid Range/
Default
(length)
Options
Value
Units
DS-65
Store /
Mode
N / Man
Description
Analog output 4
Information to generate constants A and B in
equation Y=A*X+B plus the addresses in a slave
device.
32
SCALE_ LOC_OUT4
DS-259
S/M
33
OUT_D1
DS-66
N / Man
Discrete output 1
34
LOCATOR_OUT_D1
DS-261
S / O/S
Addresses in a slave device.
35
OUT_D2
DS-66
N / Man
Discrete output 2
36
LOCATOR_OUT_D2
DS-261
S / O/S
Addresses in a slave device.
37
OUT_D3
DS-66
N / Man
Discrete output 3
38
LOCATOR_OUT_D3
DS-261
S / O/S
Addresses in a slave device.
39
OUT_D4
DS-66
N / Man
Discrete output 4
40
LOCATOR_OUT_D4
DS-261
S / O/S
Addresses in a slave device.
41
UPDATE_EVT
DS-73
42
BLOCK_ALM
DS-72
Na
Na
D
This alert is generated by any change to the static
data.
D
The block alarm is used for all configuration,
hardware, and connection failure or system
problems in the block. The cause of the alert is
entered in the subcode field. The first alert to
become active will set the Active status in the
Status attribute. As soon as the Unreported status
is cleared by the alert reporting task, another
block alert may be reported without clearing the
Active status, if the subcode has changed.
Legend: E – Enumerated parameter; Na – Dimensionless parameter; RO – Read only; D – dynamic; N – non-volatile; S – Static
Gray Background Line: Default Parameters of Syscon
2.228