Download 2 - Cascade Corporation

I
1.1
NTRODUCTION
Introduction
This manual provides the Periodic Maintenance,
Troubleshooting, Service and Specifications for Cascade
F-Series Paper Roll Clamps.
In any communication about the attachment, refer to the
product I.D. number stamped on the nameplate as shown.
If the nameplate is missing, the numbers can be found
stamped on the front of the faceplate top or side.
IMPORTANT: All hoses, tubes and fittings on these
attachments are JIC.
NOTE: Specifications are shown in both inch and (Metric)
units where applicable. All fasteners have a torque value
range of ±10% of stated value.
Nameplate Locations
c
SERIAL
NUMBER
CATALOG
NUMBER
ADDITIONAL
EQUIPMENT
ADDITIONAL
EQUIPMENT
ADDITIONAL
EQUIPMENT
RC0720.eps
1.2
LIFT TRUCK ATTACHMENT
674870
60F-RCP-459
WEIGHT
LBS.
ATTACHMENT CAPACITY
POUNDS
INCH LOAD
AT
CENTER
CAPACITY OF TRUCK AND ATTACHMENT COMBINATION
MAY BE LESS THAN ATTACHMENT CAPACITY SHOWN
ABOVE. CONSULT TRUCK NAMEPLATE.
RECOMMENDED SYSTEM PRESSURE – 2000 PSI
MAXIMUM SYSTEM PRESSURE – 2300 PSI
FOR TECHNICAL ASSISTANCE, PARTS AND SERVICE
CONTACT:
1-800-227–2233
PORTLAND, OREGON USA
70
8
4
67 OR 459
CPR
F
60
Special Definitions
The statements shown appear throughout this manual
where special emphasis is required. Read all WARNINGS
and CAUTIONS before proceeding with any work.
Statements labeled IMPORTANT and NOTE are provided
as additional information of special significance or to make
your job easier.
WARNING - A statement preceded by
WARNING is information that should be
acted upon to prevent bodily injury. A
WARNING is always inside a ruled box.
CAUTION - A statement preceded by CAUTION is
information that should be acted upon to prevent
machine damage.
IMPORTANT - A statement preceded by IMPORTANT is
information that possesses special significance.
NOTE - A statement preceded by NOTE is information that
is handy to know and may make your job easier.
674512-R7
1