Download CE3000-120AP
Transcript
2. PARTS NAMES and FUNCTIONS (3) Mount the CE3000 cutting plotter on the stand by inserting the positioning pins on the stand into the positioning holes on the underside of the cutting plotter. Fasten using the four coin screws or hexagonal socket bolts (M6). CE3000-60 Positioning pins Stand CE3000-60 Coin screws CE3000-120 Positioning pins Stand Hexagonal socket bolts (M6) CE3000-120 (4) Pull out the sheet support pipe and attach the sheet. Divide the sheet over the center bar, and then fasten the sheet to the sheet support pipe using the press-studs. CE3000-60 Sheet support pipe Sheet Divide over the center bar Press-studs Devide over the center bar Sheet support pipe Press-studs CE3000-120 Sheet CE3000-UM-251-9370 2-14