Download Removing the generator cover

Flywheel - generator
2 of 12
26
27
28
29
30
31
32
33
34
35
36
37
file:///C:/Users/PKM/Desktop/Peter/Hypermotard Service Manual/Work...
Screw
Circlip
Reference pin
Ignition flywheel
Flange
Starter clutch
Inner ring
Starter driven gear
Roller cage
Washer
Nut
Belleville washer
Parts catalogue
1100
1100
1100S
1100S
ALTERNATOR COVER
ELECTRIC STARTER AND IGNITION
ALTERNATOR COVER
ELECTRIC STARTER AND IGNITION
Caution
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not
appear in the figures near the text.
Removing the generator cover
Operations
Reference - See Section
Drain engine oil
D 4, Changing the engine oil and filter
cartridge
Remove gearchange control
F 5, Removing the gear change control
Remove the clutch transmission
unit
F 2, Removing the clutch transmission
unit
Remove the chain sprocket cover G 8, Removing the chain front
sprocket
Note
For reasons of clarity, the figures show an engine removed from the frame.
Unscrew the screws (16) and remove the chain guard (2).
Undo the two retaining screws (6) of the small cover (5) placed at crankshaft end.
4/29/2013 6:49 PM