Download user Manual
Transcript
Glossary Absorbent: chemical media used to remove CO2 from exhaled gas Absorbent Filter: Mechanical assembly where the CO2 absorbent is housed ADV: automatic diluent valve - a valve that automatically adds fresh gas supply to the counterlungs as it collapses from increased pressure of depth or if it is needed after venting too much gas as in a mask clearing exercise. Bailout: redundant gas supply system Balance Tube: The tube between the exhale counterlung and the LCV. This tube removes water from the counterlung and controls (breathing) loop pressure with the LCV. BUD (Buddy Universal Display): Universal display on side of LSS module, codes identical to HUD BCD (Buoyancy Control Device): the harness/buoyancy compensator assembly BOV: bail out valve Breakthrough: where absorbent scrubber fails, no longer removing CO2 at an adequate rate Breathing Hose: The large hoses that connect the Canister assembly to the BOV Breathing Loop: parts of the rebreather that breathing gas circulates within Canister: Mechanical assembly where the Absorbent Filter is housed Caustic Cocktail: very alkaline liquid (water mixed with CO2 absorbent material) CCR (CC): closed circuit rebreather CO2: carbon dioxide Diluent: a gas used for breathing volume and to reduce the fraction of oxygen in the Breathing Loop Dive Control Parameter (DCP): The control to define how high the oxygen level is set for the dive profile. Exhale Counterlung: The counterlung positioned behind the diver’s right shoulder FO2: fraction of oxygen Graphical User Interface (GUI): The display system for communicating information to the diver Heads Up Display (HUD): the LED display positioned in front of the mask HP: high pressure Inhale counterlung: the counterlung positioned behind the diver’s left shoulder IP: intermediate pressure 120 |