Download Model 3012 Mobile Data Terminal

Model 3012 Service Manual
Text Messaging
The 3012 can receive and store up to 248 text messages up to 240 characters each. The text mode allows you
to view, print and delete stored messages.
In normal operating mode, the 3012 will display the number of new messages received in the upper right hand
portion of the LCD display. If there are new messages pending, pressing the Text button will enter the text message
mode and will display the first new message. If no new messages are pending, pressing the Text button will enter
the text message mode and display the oldest stored message.
In text message mode, the entire message is displayed along with the date and time received. Use the Up/Down
arrow keys to move to the next or previous stored message.
There are 5 soft keys (buttons 1-5) that are available for use in text mode:
Print: Sends the currently displayed message to the printer. Ensure the printer is connected and powered on before
pressing the print soft key. The message is printed 40 characters per line and will appear as on the LCD display.
Delete: Deletes the currently displayed message. You will be asked to confirm. The messages cannot be recalled
once they are deleted. To delete all stored messages, use the self test mode Purge (see page 18 for a complete
description).
Begin: Moves to the oldest stored message in memory.
End:
Moves to the newest stored message in memory.
Exit:
Returns to status mode, normal operation.
Note: While in text mode, you cannot send status requests, GPS updates or receive other
)
messages from the base. There is a timer that prevents the 3012 from staying in text mode indefinitely.
Pressing any valid key while in text mode resets the timer.
Page 6