Download Intelligent Programmer Software User Manual

7
MAINTAINING DEVICE
CONFIGURATIONS
To maintain the Intelligent Programmer Software
(IPS), you need to keep each V Series Security
Device’s programming up to date. You might need
to modify a device’s programming to change how it
operates. You also might need to add, modify, or
delete information in a device’s user database.
To update a device or group of devices, you perform
the following tasks:
1. Update the device configuration for the device or
group of devices by editing the configuration.
2. For each device to be updated with the device
configuration, connect a palmtop or laptop PC
containing the updated configuration to the
device and transfer the updated configuration to
the device.
This chapter describes how to make the following
common changes to a device configuration’s
programming settings and user database:
■ adding a facility code or changing the range of
card numbers or access codes for a facility code.
See page 7–3.
■ changing or adding a communication token and
password. See page 7–4.
■ changing or adding holidays. See page 7–6.
■ changing or adding a time zone. See page 7–7.
■ changing the user database. See page 7–8.
Intelligent Programmer Software User Manual
7–1