1
Download PDF Troubleshooting Guide
Transcript
Fault Isolation Procedures Code 43 (SID 36, FMI 4,5,6) Low Range Solenoid Step A Procedure 1. Test drive vehicle to verify active Fault Code 43. Condition Action Active code 43 Replace transmission ECU retest. and In-active code 43 Record and clear all inactive fault codes. Test drive vehicle to verify complaint. Perform diagnostic procedure for active fault codes or follow symptom complaint procedure if no faults are logged. Code 43 (SID 36, FMI 4,5,6) 2-16
