Download FoCOM user manual - Auto

FoCOM user manual
www.obdtester.com/focom
5 Settings
All functions in settings are described below.
Language - choose language of diagnostic application user interface in the drop down menu.
Units type - you can choose metric or imperial unit system for measured values.
Refresh - this button refreshes COM port selection drop down list. Correct COM port number
should be already chosen after connecting diagnostic interface via USB to PC and clicking on
Refresh button. If not, choose correct COM port number from the list. It is needed in order to
perform successful interface test.
Test interface – before each use of program, please test proper function of your connected interface
by clicking this button. After successful test, you can see a serial number of your interface displayed
below the COM port field, then firmware version and information about active licenses.
Activate license – this button is used for activating new license/s to use the program or special
functions. Internet connection is required. Standard license is already activated for all interfaces
before purchase.
Upgrade firmware – use this button to upgrade firmware in your diagnostic interface every time
after installing the latest software version (available at www.obdtester.com/downloads). Do not
disconnect your interface during upgrading the firmware.
13 / 43