Download Service manual - SPIDER
Transcript
RANSOMES SPIDER SERVICE MANUAL Fig. 32 2.4 Changing the hydraulic drive Disassembly: - Disconnect the hydraulic drive hose (CAUTION! Do not allow the oil to to come into contact with the V-belts!) - Remove the expansion tank - Remove the control unit - Disconnect the controls bracket from the support and disconnect the DC electric motor (Fig. 34) - Remove the support and cross welded piece (see changing the travel belts) - Remove the pulley and hydraulic drive from the cross welded piece (Fig. 32) Fig. 34 Fig. 33 GB-12