Download Service manual - SPIDER

Transcript
RANSOMES SPIDER
SERVICE MANUAL
Fig. 32
2.4
Changing the hydraulic drive
Disassembly:
- Disconnect the hydraulic drive hose (CAUTION! Do not allow the oil to to come into contact with
the V-belts!)
- Remove the expansion tank
- Remove the control unit
- Disconnect the controls bracket from the support and disconnect the DC electric motor (Fig. 34)
- Remove the support and cross welded piece (see changing the travel belts)
- Remove the pulley and hydraulic drive from the cross welded piece (Fig. 32)
Fig. 34
Fig. 33
GB-12