Download Aestiva Anesthesia Machine

8 Illustrated Parts
8.17.4 Display mount parts (heavy duty)
1
2
7
3
4
14
13
Slit
Slot
8
5
4
6
Note: Refer to Section 4.19.2
for proper adjustment of the
heavy duty display mount.
11
Item
1
2
3
4
5**
6
7***
8
9
10
11
12
13
14
12
10
9
2*
Description
Heavy Duty Display Mount upgrade Kit,
used to upgrade a standard single display mount to a multiple
vertical 12" to 18" display.
Heavy Duty Display Mount retrofit Kit,
used to upgrade a standard display mount to heavy duty,
does not include display mounting hardware
Axle
Washer, thrust plastic
Spacer, knuckle
Screw, M4x12 SKT HD CAP
Spacer, slip plastic
Housing, bearing support
Bearing assembly
Cap, arm bearing
Screw, M6x20 SKT HD CAP
Screw, M8x25 SKT HD CAP
Spacer, counter draft
Washer, flat
Grommet, Pivot Arm
Wrist Casting, with mid sleeve, pivot arm
* O-ring, wrist casting, 57.45 OD, 50.39 ID (2)
Stock Number
M1072794
M1055685
1602-3021-000
1602-3017-000
1006-4728-000
1102-3006-000
1602-3015-000
1006-4727-000
M1055689
1011-3392-000
0144-2436-212
9211-0680-255
1006-4729-000
1006-3536-000
1006-3231-000
1006-7062-000
1006-3230-000
* Lubricate sparingly with Krytox.
** Position the slip spacer (Item 7) so that the split when the spacer is in position is opposite the
slot in the housing (Item 6).
***With housing (Item 6) positioned as shown, place bearing (Item 5) in housing with writing on the
side on the bearing facing up.
1006-0452-000
09/06
8-29