Download For DigiMUX - Fitch Security Integration

DigiClient
RECORDING
PARAMETER
Normal Partition
Full Alarm
DESCRIPTION
When set to ON, triggers an alarm when the Normal
Partition is full.
NOTE: This item can be enabled only if Circular Recording
is OFF.
When this alarm occurs, you can export important data and
purge the drive for further recording.
When set to OFF, no alarm is triggered.
The default setting is OFF.
Audio Recording
Enables audio input recording to accompany the video
recording when set to ON. OFF indicates no audio
recording.
Recorded audio is available with video playback from the
DigiMux unit when powered speakers are attached and
audio capability is enabled. One channel of audio may be
recorded. See the DigiMux User’s Manual for details.
Event Record
Partition
Indicates a specified percentage of the hard drive that is to
serve as the Event Record partition of the record database.
This portion of the database stores event video only.
Event Active in the Scheduling area of Record Settings
should be set to Both, Motion, or Alarm for this partitioning
to be useful (see Additional Recording Items on page 40). The
default value is 0%. For more information about how
events are recorded, see Alarm List and Event Video on
page 24.
Data Life Time
Enables or disables Data Life Time, which allows deletion
of selected video data. See Data Life Time on page 46 for
more information.
Purge Recording
Data
Allows you to delete the Normal or Events record
databases. Click Normal to delete the Normal database
entries, or Events to delete the Events database entries.
A confirmation box is displayed. Click OK to proceed with
the purge, or Cancel to abort the process.
NOTE: Deleting recording data completely removes it from
your database.
NOTE: Purging removes data from your drive, but does not reformat the drive. For
information on formatting the hard disk drives, see the DigiMux User’s
Manual.
Configuring the Remote Unit
41