Download Installation Manual

230
NetworX Version 3 Installation Manual
LOC
DESCRIPTION
DEFAULT
14-14-14-14-14-14-14-1414-14-14-14-14-14-14-1414-14-14-14-14
10-10-10-10-10-10-10-10
0-0-0-0-0-0
(name of operator)
99
99
PROGRAMMING DATA
168
U/D call-back phone number (for CSD GSM)
169
170
171
172
173
174
GSM SIM PIN code
GSM operator selection
Current GSM operator (read only)
Current GSM RSSI (read only)
Current GPRS Bit Error Rate % (read only)
DEVICE STATUS FLAGS (read only)
Segment 1
1
On = Communication with GSM modem OK
2
On = SIM card PIN is OK
3
On = Logged in to the GSM network
4
On = Sending SMS
5
On = Using GSM audio connection
6
On = Using GSM CSD connection
7
On = Connected to GPRS network
8
On = SIM card PUK code required
Segment 2
1
On = Battery voltage failure
2
On = GSM PSU voltage failure
3
On = Bus voltage failure
4
On = Communication channel failure
5
On = U/D session in progress
6
On = U/D session starting
7
On = Reporting in progress
8
On = Good RSSI Level
Segment 3
1
On = Max reports in 24h limit reached
Reserved
2-8
(name of manufacturer)
GSM modem manufacturer (read only)
(name of model)
GSM modem model (read only)
(software revision)
GSM modem software revision (read only)
(serial number)
GSM modem serial number (read only)
Reserved
MISCELLANEOUS FEATURE SELECTION
Segment 1
Reserved
Segment 2
1
On = Enable HomeText Control
2
On = only commands from registered phone numbers are accepted
Off = commands from any phone number are accepted
3
On = A password must be included with the HomeText message
Off = A password only required for HomeText messages from unregistered phone(s)
4
On = Forward unrecognized received SMS messages to the Administrator Phone
5
On = Initiate an up/download session via call-back when audio call is detected
6
On = Enable XSIA reporting for SIA overall media types
7
On = TCP/IP polling time in hours
Off = TCP/IP polling time in minutes
8
Reserved
Segment 3
1
On = Disable GSM/GPRS Line Fault indication on keypad
175
176
177
178
179-199
200