Download Installation Manual
Transcript
244 NetworX Version 3 Installation Manual Table 38. NX-586E direct connect module serial connector Sub D9 D25 RXD PIN 2 PIN 3 TXD PIN 3 PIN 2 GND PIN 5 PIN 7 Connect the cable to the NX-586E direct connect module. 7. 8. Using stripped wires, connect the cable with alligator clips to a NetworX V3 panel as follows: • Red to POS • Black to COM • Green to DATA Connecting the NX-586E to a PC and a panel Connect the NX-586E direct connect module to the serial port of the PC and the panel as shown in the previous section.