Download INSTALLATION MANUAL

6.2.3. R.C. Master/Slave Setting
1.
1.
(a) If the remote controller is a single
connection, this setting is omitted.
Proceed to “6.2.4. Data and Time Setting”.
(b) If a remote controller has multiple
connections, and if “Master” is initially
set, all other units will be set to “Slave”.
Mode
Master
OK
back to the “Date and Time Setting” screen.
3. Touch the [Time] on the “Date and Time Setting” screen. The “Time”
screen is displayed.
Date
Time
10:00 AM
Day/Month/Year
12:00-11:59AM/PM
Disable
Date Format
Time Format
Summer Time Setting
Cancel
3.
Fri 10:00AM
Day
Month
14
Year
9
OK
2012
Cancel
Date and Time Setting
Time
10:00 AM
Cancel
Day/Month/Year
12:00-11:59AM/PM
Disable
AM
Cancel
Temp. Unit
Setting
R.C.Group
Name Setting
Password Setting
Next
Page
Master Indoor
Unit Setting
Page 3/ 3
RC Master/
Slave Setting
Display Item
Setting
Previous
Page
Back
Initial Setting
Next
Page
Previous
Page
Back
Date Setting
Date and Time Setting
Display Format Setting
Back
When settings for all items are complete, the screen will return to the
home screen. touch [Back] to return to the “Initial Setting” screen.
• Date and Time Setting
Date and Time Setting
Fri 10:00AM
Date
Time
14/ 9/2012
10:00 AM
min.
40
Page 2/ 3
R.C. Sensor
Setting
Setting” screen. The “Date Setting” screen
is displayed.
Select and touch “Date and Time Setting”
or “Display Format Setting”.
OK
5.
8
Initial Setting
Page 1/ 3
Date Setting
1. Touch the [Date Setting] on the “Initial
“Temperature Unit Setting” screen.
hour
Maintenance
Previous
Page
6.3.2. Date Setting
5. Touch [OK] on the “Date and Time Setting” screen to display the
Fri 10:00AM
Initial Setting
Monitor
Touch the [Language Setting] on the “Initial Setting” screen. The “Language
Setting” screen is displayed.
For the method of setting language, refer to 6.2.2. Language Setting. Select
the language to be used, and touch [OK] on “Language Setting” to go back
to the “Initial Setting” screen.
back to the “Date and Time Setting” screen.
Time
Preference
6.3.1. Language Setting
4. Touch [ ] or [ ] to set hours, minutes, and AM/PM. Touch [OK] to go
4.
Next
Page
Page 2/ 2
Summer Time
Setting
Fri 10:00AM
Date
14/ 9/2012
Date Format
Time Format
Summer Time Setting
OK
Special Setting
Monitor
Language Setting
Back
2.
Weekly Timer
Setting
Main Manu
[Previous Page] to switch between screens. Touch the items you wish
to configure.
screen is displayed.
Date
Timer Setting
Menu
Initial Setting
2. Touch [ ] or [ ] to set the year, month, and date. Touch [OK] to go
Page 1/ 2
Air Flow Direction
Setting
3. The “Initial Setting” screen has three pages. Touch [Next Page] or
1. Touch the [Date] on the “Date and Time Setting” screen. The “Date”
14/ 9/2012
Fan
Status
6.2.4. Date and Time Setting
Fri 10:00AM
Set Temp.
Slave
Cancel
Touch [OK] to display the “Date and Time Setting” screen.
Date and Time Setting
Main Manu
Fri 10:00AM
Please set only one Master remote controller. Units other than Master are
set to Slave automatically.
When remote controllers are set to “Slave”, setting items will be restricted.
1.
2.
R.C. Master / Slave Setting
Date Format
Time Format
Summer Time Setting
OK
Day/Month/Year
12:00-11:59AM/PM
Disable
Cancel
OK
Touch the [Date and Time Setting] on the “Date Setting” screen. The “Date
and Time Setting” screen is displayed.
For the method of configuration, refer to 6.2.4. Date and Time Setting. Set
all required items, and touch [OK] on the “Date and Time Setting” screen to
return to the “Initial Setting” screen.
• Display Format Setting
6.2.5. Temperature Unit Setting
1. Touch the [Date Format] on the “Display Format Setting” screen. The
“Date Format” screen is displayed.
1. Select and touch [°C] or [°F] and touch [OK].
2. When initial start-up setting is complete, the screen on the right will
be displayed.This screen is the “Monitor mode screen”, which is the
home screen of this unit.
1.
2. Select and touch the data display format. Touch [OK] on the “Date
Format” screen to return to the “Display Format Setting” screen.
3. Touch the [Time Format] on the “Display Format Setting” screen. The
“Time Format” screen is displayed.
2.
1.
Temperature Unit Setting
2.
Set Temp.
Fan
°C
Display Format Setting
Fri 10:00AM
Date Format
Date Format
Status
Cancel
6. 3. Initial setting
Configure settings required at the time of installation. For details of the
setting, refer to the operating manual on the attached CD-ROM.
This unit has two kinds of passwords; password for administrators and
password for installers. Password for administrators cannot be used for the
settings related to the installation of this unit.
Password Verification
Enter Current Password
Installer password can be used to configure all of
setting for this unit.
1
2
3
4
0
CL
When “Password (Installer Password)
5
6
7
8
9
Verification” screen is displayed, enter the
Cancel
OK
password (installer password) and touch [OK].
The default password is “0000” (4 digits).
1. Touch the [Menu] on the “Monitor Mode screen”. The “Main Menu”
screen is displayed.
2. The “Main Menu” screen has two pages. Touch [Next Page] or
[Previous Page] to switch between screens. Touch the [Initial Setting].
OK
Cancel
Fri 10:00AM
Date Format
Time Format
Year/Month/Day
12:00–11:59AM/PM
Menu
Display Format Setting
Day/Month/Year
Month/Dat/Year
Time Format
OK
Fri 10:00AM
Day/Month/Year
Day/Month/Year
°F
Cancel
3.
Fri 10:00AM
Mode
12:00–11:59AM/PM
OK
Cancel
OK
4. Select and touch the data display format. Touch [OK] on the “Time
Format” to return to the “Display Format Setting” screen.
5. Touch [OK] on the “Display Format Setting” screen to return to the
“Date Setting” screen.
4.
5.
Time Format
Fri 10:00AM
Display Format Setting
0:00–11:59 AM/PM
0:00–23:59
Cancel
Fri 10:00AM
Date Format
12:00–11:59 AM/PM
Day/Month/Year
Time Format
12:00–11:59AM/PM
OK
Cancel
OK
6.3.3. Temperature Unit Setting
Touch the [Temperature Unit Setting] on the “Initial Setting” screen. The
“Temperature Unit Setting” screen is displayed.
For how to configure, refer to 6.2.5. Temperature Unit Setting. Set
temperature units and touch [OK] on the “Temperature Unit Setting” to return
to the “Initial Setting” screen.
En-5