Download EM3096_User_Guide_EN

Enter Setup
USB Interface (Optional)
USB Enumeration
If the engine is connected to the Host via a USB connection, the engine will be enumerated using S/N or
“00000000” after power-up. Enumeration using S/N enables the Host to distinguish even between
engines of same model. Enumeration using “00000000” disables the Host from distinguishing between
engines of same model.
Driver installation is required for each USB device distinguished from others by the Host in the process of
enumeration.
Enumeration Using S/N
** Enumeration Using “00000000”
USB HID-KBW
When you connect the engine to the Host via a USB connection, you can enable the USB HID-KBW
feature by scanning the barcode below. Then engine’s transmission will be simulated as USB keyboard
input. The Host receives keystrokes on the virtual keyboard. It works on a Plug and Play basis and no
driver is required.
USB HID-KBW
9
* Exit Setup