Download User's Guide

Transcript
RIGOL
Chapter 11 Remote Control
Remote Control Via LAN
1.
Connect the devices
Connect the generator to your LAN using network cable.
2.
Configure LAN parameters
Set the LAN parameters of the generator according to the description in “To
Configure the Remote Interface”.
3.
Search device resource
Start-up Ultra Sigma and click
, then click
in the
pop-up window, the software starts searching for the generator resources
connected to the LAN. Instrument resources searched will be displayed in the
right of the window. Select your desired resource and click
to add
the resource, as shown in the following figures.
11-4
User’s Guide for DG5000