Download USER MANUAL
Transcript
Chapter 8 DL-4 Commands Message Id = 54 Field Data 1 Header 2 Action, see Table 37 3 4 Bytes Format Units Offset - - 0 4 Enum none H GroupName1 12 Char[] none H+4 GroupName2 12 Char[] none H+16 Table 37: Action Binary Value ASCII Value Description 0 ADD Add a group 1 DEL Delete a group 2 CLEAR Erase all groups 3 COPY Copy one group to another Table 38: GROUP Default Configuration Parameter Group table Power-On no change Freset Only DEFAULT group, see Page 106 Stored in NVM YES 8.15.1 Factory-Reset DEFAULT Group The factory-reset DEFAULT group is defined as follows: • • • • • • • • • • RANGECMPB ONTIME 10 ALMANACB ONCHANGED RAWEPHEMB ONCHANGED IONUTCB ONCHANGED RTCAOBS ONTIME 1 RTCAREF ONTIME 10 RXSTATUSEVENTB ONNEW HWLEVELSB ONTIME 60 POSAVE 0.01 INTERFACEMODE COM2 NONE RTCA OFF You may edit or delete the factory-reset DEFAULT group. 106 DL-4 User Manual Rev 3