Download USER MANUAL

Chapter 8
DL-4 Commands
8.19 GROUPDGPSTXID
The groupdgpstxid command allows you to edit the DGPS base id configuration for the group.
The group can be configured to store base id for one DGPS message type.
The groupdgpstxid set command sets the DGPS base id configuration for the group named
groupname to type and id (refer to the OEM4 GPSCard documentation, DGPSTXID command,
for further details on type and id).
The groupdgpstxid clear command removes the DGPS base id configuration from the group
named groupname.
The groupdgpstxid default command removes the DGPS base id configuration from the
group named groupname.
Syntax
groupdgpstxid set groupname type id
groupdgpstxid default|clear groupname
8.19.1 Groupuse Translation
groupuse start
•
If set, the dgpstxid command is issued.
groupuse stop
•
None.
Message Id = 271
Field
Data
Bytes
Format
Units
Offset
-
-
0
1
Header
2
Parameter Update, see Table 43 on Page 111
4
Enum
none
H
3
Group name
12
Char[]
none
H+4
4
DGPS Type, see Table 92 on Page 168
4
Enum
none
H+16
5
ID
5
Char[]
none
H+20
Table 42: GROUPDGPSTXID Default Configuration
Parameter
110
Power-On
Freset
Stored in NVM
type
no change
AUTO
YES
id
no change
NUL
YES
DL-4 User Manual Rev 3