Download DocuPrint C2255 User Guide

[Language]
Menu
Language
Setting
Language
Description
Sets the display language for the control panel.
• [English] (default)
The display language is English.
• [Trad. Chinese]
Displays screen messages in traditional Chinese.
• [Simp. Chinese]
Displays screen messages in simplified Chinese.
• [Korean]
Displays screen messages in Korean.
*1
When [Auto] is selected, data will be deleted if the language emulation automatically
selected is not present or is unavailable on the printer.
*2
Holding down the < > or < > button cycles through the options. To display a setting's
default value, press < > and < > at the same time.
*3
The following information is printed in each line during dump printing:
*4
Count
Prints the total number of bytes counted from the beginning of
the job data.
Hexadecimal code
Prints print data delimited in 4 bytes in hexadecimal format.
ASCII code
Prints print data using JIS X0201 8-bit coded characters.
Characters that are not defined in JIS X0201 are printed as
“UD”.
Character List
No.
*5
Type
Characters
1
Blank
Space
2
Alphabet
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijkl
mnopqrstuvwxyz
3
Numerals
0123456789
4
Symbols
!"#$%&'()*+,-./:;q=r?@m\n^_`
• When [Enabled] is set, and the print mode is set to [HexDump], PJL commands are
also output by [HexDump].
• When language emulation not installed on the printer is specified by a PJL
command, data is deleted.
5.2 Common Menus Setting
171