1
Download Installation / Troubleshooting Manual
Transcript
Twin Engine FloNET Interface Module Installation using Barrier Terminal Strip Connectors NMEA 2000 Display Device Drop Cable TERMINATION RESISTOR: 120 Ohm +/- 5% 1/4-Watt NET-H (WHITE) NMEA 2000 Backbone Cable NET-H (WHITE) TERMINATION RESISTOR: 120 Ohm +/- 5% 1/4-Watt NMEA 2000 Backbone Cable NET-L (BLUE) NET-L (BLUE) NET-C (BLACK) -12VDC NET-C (BLACK) -12VDC NET-S (RED) +12VDC NET-S (RED) +12VDC SHIELD SHIELD SHIELD SHIELD STBD PORT FloNET Interface Module Network Power Supply Connection FloNET Interface Module Drop Cable 16.5 GPH 293.7 GAL Drop Cable TOT S4 16.8 305.4 GPH GAL 0 0 TOT S4 0 0 0 E B W R B 2 3 4 5 A R F 0 1 D C B 9 8 7 0 E D C B A 6 W R B W R B F 0 1 2 3 4 5 9 8 7 6 W Cable Shield Connect Cable Shield Drain Wire to Vessel Bonding System or Engine Block CABLE Cable Shield RED RED BLACK WHITE WHITE WHITE Cable Shield BLACK RED RED BLACK WHITE Cable Shield BLACK Cable Shield -12VDC CABLE Electronic Distribution Panel In Accordance With ABYC E-11 CABLE CABLE +12VDC Forward Return Forward Return Flow Sensor Flow Sensor Flow Sensor Flow Sensor Connect Cable Shield Drain Wire to Vessel Bonding System or Engine Block 04/09/2008 FloScan Instrument Company, Inc. 3016 NE Blakeley Street, Seattle, WA 98105 Connect Cable Shield Drain Wire to Vessel Bonding System or Engine Block Connect Cable Shield Drain Wire to Vessel Bonding System or Engine Block Connect Cable Shield Drain Wire to Vessel Bonding System or Engine Block 2000-082-00 Tel: (206) 524-6625 Fax: (206) 523-4961 email: [email protected] http://www.floscan.com
