Download MobIP Webinterface User's Manual

Transcript
TOPEX MobiLink IP
User`s Manual
4.
Push the holder tray with the SIM inside back into the corresponding slot of the
MobiLink unit
Also follow the steps described above when replacing the SIM cards already installed into
MobiLink. Repeat this procedure for the second SIM, take care to insert the SIM card correctly.
5.6 CONNECTING THE EXTERNAL ANTENNAS
To ensure a good quality of transmission and to reduce radio interference use the antennas
shipped in the MobiLink IP package. These antennas were designed for the respective frequency
bands (multiband to allow proper connection to different mobile networks type GSM or 3G).
The antennas must be connected to MobiLink IP via the respective RF circular connectors
on the top panel of the case, labelled “ANT.1” and respectively “ANT.2”.
These correspond to networks Mobile 1 and Mobile 2. The cable for each Mobile antenna
must be threaded into the circular connector of MobiLinkIP labelled “ANT1”, respectively “ANT2”,
as shown in the following drawing.
Figure 7: Attachment of antennas
TOPEX S.A.
+4 021.408.39.00
http://www.topex.ro
Page 22 of 88