Download MobIP Webinterface User's Manual
Transcript
TOPEX MobiLink IP User`s Manual 6.6.1 PBX > Status Displays the current state of the ports of the embedded “phone exchange” as well as the states of the calls: There are two sections, PBX Ports and respectively Calls. In the stand-by state shown above, both ports are “free” and no info about calls is displayed, since there are currently no conversations going through the MobiLinkIP. PBX ports Shows the state of the two mobile (GSM) interfaces of the equipment, from the point of view of the call control application. They may be FREE (available), BLOCK (blocked for calls) or BUSY (in a call). Note: The display “BLOCK” means that NOW the respective Mobile interface is not available, but it may have several different reasons: The module was disabled from the Web interface, it does not have a good SIM, or simply the device has been rebooted and the respective module is in the initialization or searching phase, and after a delay it may become again available, such as shown below! TOPEX S.A. +4 021.408.39.00 http://www.topex.ro Page 54 of 88