Download Insight User Manual - Sontec Integrated Systems

Changing Client Settings
You can change Insight settings for your workstation. These
settings apply universally to all modules on the workstation.
1. On the Tools menu, click Insight Client Settings
2. Make your changes.
3. Click Save or Apply.
The settings are:
•
Server
o Server Address (not available in Lite):
specifies which computer is running the
Insight Database Server. If Insight is
installed on a single computer, or if this computer is the server in a multicomputer installation, then select “This Computer”. If this computer is not the
server in a multi-computer installation, click “another computer” and enter the
name or IP address of the server computer.
•
Logging
o Specifies diagnostic logging options. Do not modify these settings unless
instructed by an Inner Range technician.
•
Client
o Client Options: tick this option if you want Launch Pad to appear whenever an
Insight module is closed.
o Password Caching: specifies when Operators must enter their password. If
caching is enabled, then Operators do not need to enter their name and
password until they quit a module, at which point the cache is cleared. If
caching is disabled, then Operators must enter their password every time a
module is started.

Tip
Press F1 at any time to get content sensitive help.
14