Download Insight User Manual - Sontec Integrated Systems

INNER RANGE recommends that
all CONCEPT systems
be installed & maintained by
FACTORY CERTIFIED TECHNICIANS.
For a list of Accredited Dealers in your
area refer to the Inner Range Website.
http://www.innerrange.com
Insight
Getting Started Manual: Revision 5
P/No: 634402
For Insight software version 5
Supporting Concept 4000 Panel firmware up to V7.8x
November, 2009
© Copyright 2006-2010
Inner Range Pty. Ltd.
The full Insight User Manual
is available in electronic form.
See the Tip on page 10.
Disclaimer:
1. The manufacturer and/or its agents take no responsibility for any
damage, financial loss or injury caused to any equipment, property or
persons resulting from the correct or incorrect use of the Inner Range
system and its peripherals. The purchaser assumes all responsibility in
the use of the Inner Range system and its peripherals.
2. Whilst every effort has been made to ensure the accuracy of this
manual, Inner Range Pty Ltd assumes no responsibility or liability for
any errors or omissions. Due to ongoing development the contents of
this manual are subject to change without notice.