Download USER'S GUIDE N11 TYPE

The single pressure of the key causes a value decrease
of one.The hold of the
key pressure causes a continuous
decrease of the value till the display of 0. The jump to the next digit
follows after this value. The further change is similar. The key release
in any moment causes a jump on the first digit.
In order to accept the set up parameter one must press the
key. Then, the writing of the parameter and display of its symbol
follow alternately with the new value. The pressure of the
key during the change of the parameter causes the resignation of
the record.
(1) - no exists in N11S and N11H executions
(2) - exists only, when the individual characteristic is included (Ind
= On)
(3) - exists only in executions with 5 displayed digits
Fig. 5. Transition matrix into the programming mode
15