Download OPERATING INSTRUCTIONS GB

x
Regularly check the condition of the screw and nut connections.
x
Before welding or electrical work, the trailer should be disconnected from the
power supply. The paint coating should be cleaned. Burning paint fumes are
poisonous for people and animals. Welding work should be carried out in a well
lit and well ventilated space.
x
During welding work pay attention to flammable or fusible elements (parts of the
pneumatic, electric and hydraulic systems, plastic parts). If there is a risk that
they will catch fire or be damaged, they should be removed or covered with
non-flammable material before commencing welding work.
x
During the warranty period, any repairs may only be carried out by a Warranty
Service authorised by the manufacturer.
x
Should it be necessary to change individual parts, use only those parts
indicated by the manufacturer. Non-adherence to these requirements may
cause danger to the health and the user's and other people's lives, and also
damage the machine.
x
After completing work connected with greasing, remove excess oil or grease.
x
Before activating the trailer, always ensure that all the safety guards are in good
condition and in place. Damaged or incomplete sub-assemblies must be
exchanged for original new ones.
2.6