Download Installation manual

Introduction
Technical specification
Case dimensions
Environment
Temperature: -10°C to +40°C
Humidity: 0-95% rh non-condensing
Power (230V AC version)
Input: 200-240V AC, 80VA max.
Output: 12V DC 1A for ACU, 2 x 12V
DC 1A for locks, 2 x 13.6V for standby
batteries
Power (110V AC version)
Input: 100-120V AC, 80VA max.
Output: as for 240V AC version
Power (18V AC version)
Input: 14-18V AC, 80VA max.
Output: as for 240V AC version
Power (12V DC version)
Input: 12V DC 500 mA max
Relays
Form C changeover rated at 30V 2A
Upgrade options
A basic installation using eXcel 2 ACUs and eXguard Lite software can be upgraded in one
of two ways:
Software-only upgrade
Upgrading from eXguard Lite to eXguard Pro will make the following features available:
•
increased card capacity (from 5 000 to 24 000)
•
serial CCTV command interface
•
possibility to add PhotoID option
•
possibility to add optional additional PCs
Software and Hardware upgrade
Upgrading from eXguard Lite 8 to eXguard Lite 16 will allow additional eXcel 2 units to be
installed, up to a maximum of 16 doors.
Upgrading from eXguard Lite 8 to eXguard Pro 16 will also increase the maximum
number of doors to 16, and in addition will add the features listed above under
“Software-only upgrade”.
6656-0390 Issue 1
page 5