Download Pediatric HAL User Guide

2.
Start the GIGA control software.
3.
On the GIGA menu bar, click Monitors>
Configuration.
The “HAL Virtual Monitor Setup” window
is displayed.
4.
Set the adapter to “Wireless network
connection” and click “Connect” to begin
transmitting the vital signs information.
Write down the “controller IP” and “Port
number”.
5.
Start the Gaumard Monitors software on
the virtual monitor PC.
6.
Click the “V” menu near the top left
corner, and then select “Comm Setup”.
The “TCP Comm Setup” window is
displayed.
7.
Enter the “Controller IP” and “Port
number” displayed on the GIGA “Virtual
Monitor Setup” window.
Click “Connect” to accept the incoming
connection.
Pediatric HAL S3005 | User Guide | 167