Download pDRIVE< MX plus/top Operating instructions

A3.12
Thermal state BR [%]
⎯
read only
Displays the calculated thermal state of the braking resistor based on the setting of parameters E3.07 and
E3.08. If the value exceeds 100%, an alarm or trip will occur (depends on E3.06).
1.) If the power part has no voltage supply ("Mains off" or "Mains missing" is displayed), these actual
values are set to 0.
A4
A4.00
Reference values
AIV 0...10 V [%]
⎯
read only
Reference value at the analog input terminal AIV (0 V...10 V corresp. to 0% ... 100 %).
A4.01
AIV scaled [Hz] ([%])
⎯
read only
⎯
read only
Scaled reference value of AIV.
A4.02
AIC 0(4)...20 mA [%]
Reference value at the analog input terminal AIC (0(4) mA ... 20 mA / 0% ... 100 %).
A4.03
AIC scaled [Hz] ([%])
⎯
read only
⎯
read only
Scaled reference value of AIC.
A4.04
AI_2 0(4)...20 mA [%]
Reference value at the analog input terminals (AI+ , AI- ) of IO1 at the option slot X2.
(0(4) mA ... 20 mA / 0% ... 100 %)
A4.05
AI_2 scaled [Hz] ([%])
⎯
read only
⎯
read only
Scaled reference value of AI_2.
A4.06
AI_3 0(4)...20 mA [%]
Reference value at the analog input terminals (AI+ , AI- ) of IO1at the option slot X3.
(0(4) mA ... 20 mA / 0% ... 100 %)
A4.07
AI_3 scaled [Hz] ([%])
⎯
read only
⎯
read only
Scaled reference value of AI_3.
A4.08
Pre-set reference [Hz] ([%])
Pre-set reference value.
>pDRIVE< MX plus/top – Operating instructions – 8 074 155.01/01 – Page 16