Download Triple-Speed Ethernet MegaCore Function User Guide

Transcript
UG-01008
2015.06.15
Transmit and Receive Command Registers (Dword Offset 0x3A – 0x3B)
Dword
Name
R/W
6-13
Description
Offset
0x2F
0x30
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
etherStatsOversi
zePkts
etherStatsPkts64
Octets
etherStatsPkts65
to127Octets
etherStatsPkts12
8to255Octets
etherStatsPkts25
6to511Octets
etherStatsPkts51
2to1023Octets
etherStatsPkts10
24to1518Octets
etherStatsPkts15
19toXOctets
etherStatsJabber
s
etherStatsFragme
nts
Reserved
RO
The number of frames received that are longer than the value
configured in the frm_length register. This count does not
include errored frames.
RO
The number of 64-byte frames received. This count includes
good and errored frames.
RO
The number of received good and errored frames between
the length of 65 and 127 bytes.
RO
The number of received good and errored frames between
the length of 128 and 255 bytes.
RO
The number of received good and errored frames between
the length of 256 and 511 bytes.
RO
The number of received good and errored frames between
the length of 512 and 1023 bytes.
RO
The number of received good and errored frames between
the length of 1024 and 1518 bytes.
RO
The number of received good and errored frames between
the length of 1519 and the maximum frame length
configured in the frm_length register.
RO
Too long frames with CRC error.
RO
Too short frames with CRC error.
—
Unused
Extended Statistics Counters (0x3C – 0x3E)
0x3C
0x3D
0x3E
msb_
aOctetsTransmitt
edOK
msb_
aOctetsReceivedO
K
msb_
etherStatsOctets
RO
RO
RO
Upper 32 bits of the respective statistics counters. By default
all statistics counters are 32 bits wide. These statistics
counters can be extended to 64 bits by turning on the Enable
64-bit byte counters parameter.
To read the counter, read the lower 32 bits first, then
followed by the extended statistic counter bits.
Transmit and Receive Command Registers (Dword Offset 0x3A – 0x3B)
Table 6-5 describes the registers that determine how the MAC function processes transmit and receive
frames. A software reset does not change the values in these registers.
Configuration Register Space
Send Feedback
Altera Corporation