Download USER MANUAL

Copyright, safety and statements
Card Nest 4
Copyright notice
The information and descriptions contained in this publication are the property of Telindus. Such
information and descriptions must not be copied or reproduced by any means, or disseminated or
distributed without the express prior written permission of Telindus.
This publication could include technical inaccuracies or typographical errors, for which Telindus never
can or shall be held liable. Changes are made periodically to the information herein; these changes will
be incorporated in new editions of this publication. Telindus may make improvements and/or changes in
the product(s) described in this publication at any time, without prior notice.
This equipment, for safety and hygiene purposes, complies with the specific provisions contained in
ARAB/RGPT 54 quater 3.1 (RD 20 06 1975, Art.1, Section X, Accident Prevention Policy).
Safety requirements
The interfaces on the Card Nest 4 should only be connected to circuit types as listed below.
Connector
screw connector
Interface
line
Circuit
TNV-1 (non-remote powering)
TNV-3 (remote powering)
RJ45
alarm
SELV
RJ45
management
SELV
RJ45
station clock
SELV
high density 5x6
remote powering control
SELV
Carefully read the safety instructions at the beginning of Chapter 2 - Installing the Card Nest 4, page 7.
Version 3.3
11 July 2001
MRP 174372
©TELiNDUS
ii