Download PML 1000 Operating Instructions
Transcript
PML 1000 Operating Instructions CONNECTING THE TRANSDUCER The transducer should be connected to the PML 1000 as illustrated in the diagram below. The PML 1000 is designed to operate with an LVDT in the Secondary to Primary Ratiometric Mode. Using this mode, the PML 1000 determines the measurement by taking into account both the primary and secondary voltages. The PML 1000 measures the differential output of the LVDT (SECA - SECB). The excitation voltage across the primary coil is also measured. When using this measurement mode the measurements will automatically be compensated for changes in the excitation voltage. See table on page five for additional LVDT connection information. MENU NAVIGATION APP-01025, Rev A PML 1000 Operating Instructions www.meas-spec.com 8/18 1109