Download ALERT User Guide

Configuration
5.12 Station properties
This dialog box defines the properties of a station.
It is called from the tree of the main screen (see § 4.6.1.2 “Station”).
Name
Name of the station. This name is limited to 40 characters and must be unique in the list of
stations.
Numeric identifier
The numeric identifier is the code to enter, at the beginning of a telephonic
communication, just before the ID code of the operator to identify the station to which the
calling or called operator is attached.
This code is only needed on main stations which have set a non null length for the station
identifier in the vocal server dialog box (see § 7.7.1 “Vocal Server options”). In the opposite
case, this field is grayed.
Call disabled
When this option is checked, alarm calls issued from the station are disabled (ca call
performed). This state is signalled by a red crossbar on the station icon ( ).
Main station
Type of the station. A main station receives the configurations of the remote stations.
During the synchronizations, the exchanged data are the data attached to the remote
stations.
This option is displayed only when the Alert stations option is checked in the general
options (see § 7.1 “General options”) and only for the local station (first station of the tree in
the main screen).
Display
Display options for the remote station in the tree of the main screen.
¾ The "Display supervision" option validates the display of the "Supervision" branch in
the sub-tree attached to the station.
ALERT
User Guide
5-53