1
Download AutoDRM Version 2.1 User Guide
Transcript
Chapter 2 Configuring AutoDRM Before running AutoDRM you must edit the configuration file (AutoDRM.ini) to provide network connection and file location information for the email server and receiver and to provide message structure and authentication parameters. 2.1 Definition of Configuration File Sections and Parameters The AutoDRM.ini file contains five required sections and two optional sections for configuring the AutoDRM subsystems. The parameters for the required sections are mandatory unless otherwise indicated. Each required section must appear once in the following order: [Interface] [Control] [Message] [Stations] [Authentication] The two optional sections, if used, must be included at the bottom of the AutoDRM.ini file: [CalibrationDefaults] [CalibrationStationDefaults] An example AutoDRM.ini file is shown in Appendix A. If you edit the AutoDRM.ini file, you must restart AutoDRM for the change to take effect. AutoDRM Version 2.1 User Guide 14830R4 2008-04-10 9 of 47
