Download USER GUIDE - HydroAsia
Transcript
DATA SELECTION TECHNIQUES IN GRAPHICAL WINDOWS Figure 3.9 Options dialog showing symbols and fonts settings. Here you control the appearance of the node labels, select fonts for the axis and labels, and checked/uncheck the ‘Collapse node’ toggle. 3.5 Zooming and Scrolling The Zoom and Scroll facilities enable focusing on the network details in a Horizontal Plan View or in a Longitudinal Profile view. The four Zoom facilities (‘Zoom In’, ‘Zoom Out’, ‘Previous Zoom’ and “Zoom to Model Extent”) are accessed through the main menu “View”, through the local menus, or by the buttons on the toolbar. The ‘Zoom In’ function works in two modes. After the activation of the ‘Zoom In’ function, the cursor changes shape, indicating that the ‘Zoom In’ function is active. A repeated clicking on the left mouse button causes a step-wise zooming, with the location pointed by the cursor put in the centre of the horizontal plot window. The ‘Zoom In’ mode can be terminated by <Esc> key. If the left mouse button is held down, the ‘Zoom In’ works as a click-and-drag feature. A rectangle around the desired sector of the presently displayed view is drawn by dragging the cursor inside the view area. When a desired area is bounded inside the rectangle, the mouse button is released and a zoomed-in view is automatically displayed. After this operation, the program automatically returns to the ‘standard’ mode. A reverse operation is achieved by the ‘Zoom Out’ function. Each time this function is activated, the displayed area is enlarged in uniform steps. The “Previous Zoom” restores the foregoing view. The “Zoom to Model Extent” zooms-out or zooms-in in one step, resulting in a view of the entire model area. Repeatedly use of “Zoom to Model Extent” will stepwise zoom beyond the full extend. When either of the other zoom functions is used the “Zoom to Model Extend” resumes its original facility. While in a zoomed view, showing only a portion of the model area, scrollbars enable scrolling through the view. The scrolling can be done continuously by dragging the scroll slides, in large steps by clicking on the scroll bar at the desired side of a scroll slide, or in small steps by clicking on the scroll arrows in the desired direction. See also section “Axes” where Zoom Tracking function is described. 3.6 Printing and Copying Graphics All graphics (Horizontal Plan View, Longitudinal Profile view, Time Series Graphs, Cross section graphs) can be copied to the Windows clipboard. Make the desired window active and select the “Copy Graphics” button. The graphics may be pasted into most Windows graphics and reporting applications. The graphical object is a vector-based set (Enhanced Windows Metafile) and can thus be edited (e.g. adding annotation, changing colours, etc). Instead of transferring the graphics directly to some running application, it can be saved as a meta-file (*.EMF) for later use. DHI Software 73